As the populization of numerical control processing technology in casting industry, more and more models are processed by numerical control tools, and easy and fast working has been a trand. Molds made from RenShape plastic panel are comparable with metal molds. Accoding the density and performance of different panels, there are dozens of products for making molds (models) which have the following features:
1. Needless of costly cutting tools and small wastage of cutting tools, which lower the using cost. Fast and easy process reduces the time of using numerical control tool;
2. When processing, no dust relesed. It features fine and smooth surface and good texture, It is also could be operated by hand;
3. Its performance is comparable with metal mold. SenShpe plastic panels feature different density, colors and surface quatity, so you can choose the product according to your need;
4. General Specification of plastic panel: 1000×500×50mm 1000×5000×100mm;
5. Befor manufacture of mold According the general size of the mold to supply plastic panels, and then intergrate them with adhensive. Plaste glue in one single surface and push it repeatly to ensure full gluing. To fix the mold by holder and the holding time is more than 18 hours;
6. Feartures: no veins, uniform texture; Needless to thinking about the mixture of veins, and no fair after processing;
7. Stable size, hard to become damp and can be saved for a long time;
8. Easy to change an repair;
9. Good eage intensity and perfect corrosion resistance.
Process performance Comparation of Renshape5168, aluminium 6061 and iorn 40

		Renshape5168	Aluminium 6061	Iorn 40
Rough Machining	Amount of Feed: (inches/m)	60-120	30-50	3-4
	Cutting Depth(inches)	0.2-0.5	0.15-0.2	0.0375
	Speed of Spindle (r/m)	6,000	3,400	1,000
Fine Machining	Amount of Feed: (inches/m)	70-140	35-55	21
	Cutting Depth(inches)	0.03-0.04	0.015	0.005

Using scope: It applies to development of new product and small and middle size production, and easy to remodel and mend.

RenPaste XH6403A/ XH6405B could be operated and cured under room temperature, and featuring small contract ratio.

Good tool finish performance after curing;
Good intensity, moderate hardness, low contract ratio and stable size;
Good tool finish performance after curing. RenPaste XH6403A/ XH6405B feature perfect tecture and can achieve similar function of processable plastic panel.

Using method:
Mixing the components fully according the fixed ratio until the color is consistant. In order to avoid buble, you’d better to use vacuum mixer. Maintain stricktly the thickness of the coating stricktly within 30mm per player and if you want thicker wall, please recoat after curing.

Using scope:
RenPaste XH6403A/ XH6405B is one kind of liquid material used for making original model of resin mold or back material of mold; For bigger model, they all have heavy wood mat and support frame, which are only for  a few models. In the surface of the models, there is one plaster layer. After the curing of the plaster glue, manufacture the model with wood tools to the required size, and the strength of surface is higher than wood.

1.According process picture to produce original mold and core box of resin mold directly and test new product. If there are some problems, we can make amending, or not we can manufacture resin mold according the exsiting model.
2.It can be used for making external mold and core box directly, and put into small amount production fast.

RenPaste XH6403A/XH6405B

Features:
RenPaste XH6403A/ XH6405B is one kind of liquid state doublecomponent material similar to mud, and could match with equipment or hand operation. It is easy to mix.

Beijing Innova Composites Technology Co., Ltd since the establishment of the use of their own first-class professional technical team and composite materials industry for many years wealth of practical experience and commitment to the full introduction of Europe and the United States the most advanced composite materials and products molding technology equipment, including Huntsman, a senior mold materials, clothing and epoxy adhesive epoxy resin and other advanced materials, flow control and the U.S. company's high-performance RTM equipment, precision Dispensing plastic injection equipment and a variety of multi-component resin system with equipment such as high-grade plastic molding equipment, and undertake all kinds of complex materials mold the design, production and training services. Its application areas around the composite materials industry, aerospace, wind energy industry, automobiles, ships, railway passenger cars, such as building materials and chemical industries.

The company has a professional institutions graduate, undergraduate education, engaged in this industry work more than five years with rich theoretical knowledge and practical experience of business professionals.

Due to product quality, courteous service, and customers over the years has won the trust and cooperation established a good relationship. Welcome to visit friends throughout the various sectors of the inquiry.